SUCCESS STORY / BULK RESIN 3D PRINTING

One production run.
A year’s supply.

In Markham, TECHNAST resin-printed this batch of fine-wire holders in days. At the customer’s expected usage, it covered about a year of assembly.

Clear resin · Fine features · Repeat partsExplore the detail ↗
01 / THE PRODUCTION RUN
Finished clear resin wire holders at TECHNAST in Markham.

THE CHALLENGE

The small component
that still has a job to do.

The brief was a tiny holder for very fine wire used in a device assembly and its gluing operation. Small overall size did not mean simple geometry: the supplied photographs show a slender body with narrow slots and repeated features packed into very little space.

For a custom component like this, the useful question is how to turn the required shape into a practical batch. TECHNAST produced the clear parts using resin 3D printing, bringing the detail of the individual component together with the repeatability of a digital manufacturing workflow.

Before committing to the batch, we printed several prototypes, varying both the material and the print settings to get the tiny hole the right size for the wire. Clear resin solved a second problem at the workbench: the assembler could look through the holder and see whether the wire was seated before applying glue.

Shared with the customer’s identity withheld.

02 / LOOK CLOSER

Geometry worth
a closer look.

Narrow openings. A slender body. Complex geometry, concentrated in a remarkably small component.

  1. 01

    Slender form

    A compact component, shown resting on a gloved hand.

  2. 02

    Fine openings

    Narrow slots make orientation, resin removal and handling important considerations.

  3. 03

    Repeated geometry

    The same digital definition can be arranged into a batch.

One part, photographed up close. Tap to enlarge.

THE PROCESS CHOICE

Why resin fits
work at this scale.

Resin printing builds parts by selectively curing a liquid photopolymer. It can reproduce fine features and complex shapes directly from a digital model, making it useful for custom components and modest production runs that do not justify dedicated mould tooling.

The process choice is only the start. Small features demand attention throughout preparation and finishing. Orientation influences printability and surface finish; supports need to be considered around functional surfaces. Washing must remove residual resin from openings, and curing must follow the selected material's requirements.

The right resin depends on the application: adhesive compatibility, heat, chemicals, loading and handling all matter. A fine-looking print is the starting point for checking the part against its actual job.

Explore TECHNAST 3D printing services ↗

03 / FROM ONE TO MANY

A small part.
A whole batch.

Real photographs of the completed parts make the outcome tangible: the same compact geometry, repeated across the production batch.

Several finished holders fit on a Canadian dollar coin.

BATCH PRODUCTION

Where bulk resin printing saves time

A small holder takes up only a fraction of a build platform. Once the geometry and settings are established, multiple copies can share a build. That spreads setup work across the batch and gives the customer a practical way to stock a custom component without commissioning a dedicated mould.

Build layout matters as much as part count. A different orientation can change the height of a build, where supports touch the part, and how easily uncured resin drains from a fine opening. Washing, curing and checking the finished features also take time. For an order like this, the useful question is how quickly we can produce a batch of holders that accept the wire, rather than how many shapes fit on a screen.

THE PROJECT OUTCOME

3 daysProduced in three days for this order
About a yearSupply at the customer’s expected usage

For this project, TECHNAST reports that the parts were produced in three days, providing approximately a year’s supply at the customer’s expected usage. A difficult little component had become a batch on hand, ready for the customer’s assembly workflow.

Turnaround and supply coverage refer to this order. Supply coverage describes expected consumption, not tested part lifespan; future lead times depend on the project.

YOUR NEXT SMALL COMPONENT

Small part.
Let's solve it.

Send the geometry, quantity and what the part needs to do. Include critical features, adhesive or chemical exposure, and your target delivery date so TECHNAST can assess a practical manufacturing route.

Discuss a small-batch project ↗

Pinch or use your browser’s zoom to inspect the image.